Category Archives: Test Equipment
Morris 59180, Digital Phone Line Tester
Digital Phone Line Tester Features: Built-in LED indicator allows testing of RJ11 4&6 position phone outlets for common trouble conditions such as dead or open lines, reversed polarity, & AC voltage Detects dangerous surge in digital or analog phone lines lines Surge suppression circuit protects against voltage spikes & surges Tests 2-Line phone systems Tests
Morris 57286, Line Splitter for Meter Clamp
Line Splitter for Meter Clamp Features: Splits line for independent testing with clamp-on meter, which measures current from the splitter without destroying the insulation of cable “X1″ and “X10″ testing terminal can be chosen Different standards of plug can be changed Suitable to all kinds of equipment Maximum overload: AC 250V 15A Conforms to the
Morris 57316, Network Cable Tester
Network Cable Tester Features: Tests & troubleshoots voice communication for open circuits, shorts, miswires, reversals, and split pairs SHIELD detection tests a cable’s shield integrity Easy to read fault display and high speed testing Debug mode for detailed fault identification results Networking Cable Tester has auto sleep mode and power off switch to decrease power
Morris 59100, Heavy Duty Solenoid Voltage & Continuity Tester
Heavy Duty Solenoid Voltage & Continuity Tester Features: Test Voltage from 120V to 600V AC/DC Non-Contact Voltage Sensor from 90V to 1000V Test Continuity & Polarity Case serves as prod holder for one-hand operation Self-storing prods Solenoid Sensing indicated by LEDs & Vibration Ergonomic Soft PVC housing for comfort grip LED Spotlight Illuminates Work Area
Morris 59116, Professional Infrared Thermometer with Laser Pointer
Professional Infrared Thermometer with Laser Pointer Features: Safely measures hot, hazardous, or hard to reach materials without touching the materials surface; simply pull the trigger & read the temperature Service Applications where temperature plays a role in product quality or equipment maintenance Built-in laser pointer locates exact spot for temperature measurement Fixed emissivity (0.95) covers
Morris 59120, Ultrasonic Distance Meter and Wood Stud Finder
Ultrasonic Distance Meter and Wood Stud Finder Features: Ultrasonic Distance Meter Laser Pointer measures from 2 feet up to 50 feet Easy-to-read LCD display Built-in calculator for measuring areas and volumes Adds linear measurements, area and volume Memory function Choose from meter or foot units Stud finder detects wood up to 3/4″ with audio indicator
Morris 59122, Voltage/Metal/Wood Detector
Voltage/Metal/Wood Detector Features: Stud Detector Finds wood or metal studs and joists behind walls, floors, and ceilings Detects wood up to 3/4″ Detects 90-250V within 6″ of a hot unshielded wire Auto calibration stud detection 4 LED’s visual and audio indicators Wood Stud Detector is operated by one 9V battery (not included)
Morris 59124, Voltage/Metal/Wood Stud Detector with LCD Display
Voltage/Metal/Wood Stud Detector with LCD Display Features: Detects wood, metal & live wire through drywall & other common wall materials Easy to read LCD display & audio signal indicated when target is located Locates & Traces hot wires Continuously detects the presence of AC voltage for safety Detects metal up to 1-1/2″ Detects voltage up
Morris 59150, Light Meter with 3-1/2″ Digital LCD Display
Light Meter with 3-1/2″ Digital LCD Display Features: Easy to use Pocket Size & Light Weight 3 1/2 Digit LCD Display with Low Battery Indication Resolution To 0.1 Lux Measurement; 1 footcandle = 10.76 lux Measuring Range 200, 2000, 20000, 50000 Lux 20000 Lux: Reading x 10, 50000 Lux: READING x 100 Accuracy: +-5% Rdg
Morris 59151, LED Light Meter for Measure LED Light Output
LED Light Meter for Measure LED Light Output Features: High Precision 0-200,000 Lux(20,000 FC) +/-3% Range Auto & Manual range switching Inquiry function for max & min values Data hold function Peak Value Measurement Zero Calibration Function Relative Value Measurement 3-1/2″ LCD Display FC/LUX Conversion Function Out of Range Indication Low Battery Indicator Touch Tone/Mute
Morris 59155, Circuit Breaker Finder
Circuit Breaker Finder Features: Quickly & easily identifies individual branch circuits at the panel box without interrupting power Find circuit breaker for each outlet by plugging transmitter into wall outlet & then moving receiver over circuit breakers using visual & audible indicators to determine correct breaker Compact Receiver unit features adjustable sensitivity for precise location
Morris 57262, Cat III 400A AC/DC TRMS Autoranging Digital Clamp Meter
Cat III 400A AC/DC TRMS Autoranging Digital Clamp Meter Features: Santoprene is overmolded on the outer surface for comfort Conforms to the IEC 61010-1 & IEC 61010-1-032 standard Double insulation (protection class 600V CAT III) True RMS for AC voltage and current Max. diameter for conductor: 1.66″ Secondary injection molding case Display: 3999 counts Decimal
Morris 57266, Cat III 200A Autoranging Open Jaw Clamp Meter
Cat III 200A Autoranging Open Jaw Clamp Meter Features: Open jaw digital electrical meter Diode test Continuity test Duty cycle test function Auto and manual range Relative Measurement Data hold Backlit auto off time limit mode Test leads and back storage Display: 3999 counts Decimal Point Readings Meets IEC61010-1 concerning safety requirements DCV: 4/40/400V+-0.7%, 1000V+-0.8%
Morris 57270, Cat III TRMS Autoranging Digital Power Clamp Meter
Cat III TRMS Autoranging Digital Power Clamp Meter Features: AC, W, VA, VAR, kWh and PE temperature measurement Max count 9999 and double scales analogue bar graph display 99 hours digital calculagraph for active energy measurement Single chip micro controller can deal with measurement, time, autorange switching control Measures: TRMS value, max value, min value
Morris 57280, AC Current Clamp-On Adapter
AC Current Clamp-On Adapter Features: Ideal tool to extend the current ranges for all multimeters 200A AC current clamp-on adaptor with voltage output via standard banana inputs to be connected to multimeters Accessories: Test leads and carrying case AC Clamp-on Current Adapter Size: 3-3/16″L x 2-1/2″W x 1 1/4″H Range 200A Output 1mV/A Sensitivity 1A/mV
Morris 57282, AC/DC Clamp-On Adapter, Low Amperage
AC/DC Clamp-On Adapter, Low Amperage Features: Low Amp Current Adapter is Compatible with any test tool, power harmonics analyzer, oscilloscope, multimeter, or other voltage measuring device AC/DC current range 2A/100A Accessories: Test leads, carrying case and 9V battery Size: 7-1/2″L x 2-3/4″W x 3-3/4″H Output 100mV/A,1mV/A Sensitivity 0.01A/mV AC/DC, +-3.0%, +-2% Low Amp Current Adapter
Morris 57040, AC/DC Digital Multimeter & Temperature Probe
Morris, 57040, AC/DC Digital Multimeter & Temperature Probe with Rubber Holster Features: AC Voltage: 200/600V+/-1.2% DC Voltage: 200m/2/20/200V+/-0.5%, 600V+/-0.8% DC Current: 2m/20m/200mA+/-1%, 10A+/-3% Digital Multimeter Resistance: 200/2K/20K/200K/2M+/-0.8% Temperature: 1°F to 752°F (-17°C to 400°C) +/- 1%, 754°F to 1382°F (401°C to 750° C) +/-2% Diode Test Audible Continuity Test Data Hold Overload Protection Power Source:
Morris 57284, AC/DC Clamp-On Adapter
AC/DC Clamp-On Adapter Features: AC/DC Clamp-on Adapter is compatible with any test tool, power harmonics analyzer, oscilloscope, multimeter, or other voltage measuring device. AC/DC current range 40A/400A Accessories: Test leads, carrying case and 9V battery Size: 7-1/2″L x 2-3/4″W x 3-3/4″H Output 10mV/A,1mV/A Sensitivity 0.1A/mV AC/DC +-3.0%, +-2.5% AC/DC Current Adapter Weight: 7oz.
Morris 57044, Autoranging Digital Multimeter with Rubber Holster
Autoranging Digital Multimeter with Rubber Holster Features: AC Voltage: 400m/4/40/400/600V+/-0.8% DC Voltage: 400m/4/40/400/600V+/-0.5% DC Current: 400u/4000/20m/40m/400m/10A+/-2% AC Current: 400u/4000/20m/40m/400m/10A+/-3% Autoranging Multimeter Resistance: 400/4K/40K/400K/4M/40M +/-0.8%, 2M+/-1% Frequency 9.999Hz to 9.999MHz+/-3% Autoranging with Manual Ranging Override Diode Test Hfe Transistor Test Audible Continuity Test Data Hold & Range Hold Overload Protection Auto Power Off Power Source: (1)
Morris 57050, Super Mini Digital Multimeter with Rubber Holster
Super Mini Digital Multimeter with Rubber Holster Features: Fits in shirt pocket for easy access AC Voltage: 200/500V+/-1.8% DC Voltage: 200m/2000m/20/500V+/-0.5% DC Current: 2m/20m/200mA+/-1.0% Resistance: 200/2000/20K/200K/2M+/-0.8% Diode Test: Tests Current 1.6mA Max, Test Voltage 3V Max Mini Digital Multimeter Tester Display: (3) 1/2″ Digit LCD, Max Reading 1999 Continuity Buzzer Battery Test IEC 1010-1 CAT
