Category Archives: Machines & Power Tools
Morris 54690, Heat Gun with Two Temperature Setting for Shrink Tubing
Heat Gun with Two Temperature Setting for Shrink Tubing Features: Specially designed for Heat Shrink Tubing Retractable Fixing Wings to Steady on Table or Ground Heat Gun with Thermostat Protection 6 Foot Cord 2 Heat Settings – Hi: 1120°F, Lo: 850°F 125V, 1500W cULus Listed
Morris 52313, 1″ PVC Pipe Conduit Bender
Features: Insert the pipe spring into the pipe and bend across your knee Permanently bend Schedule 40 PVC pipe up to 90° without pipe collapsing Eliminates the need for heat guns or heating blankets Use fewer PVC fittings Note: Room temperature should be above 60°F.
Morris 52315, 1-1/2″ PVC Pipe Conduit Bender
Features: Insert the pipe spring into the pipe and bend across your knee Permanently bend Schedule 40 PVC pipe up to 90° without pipe collapsing Eliminates the need for heat guns or heating blankets Use fewer PVC fittings Note: Room temperature should be above 60°F.
Morris 52314, 1-1/4″ PVC Pipe Conduit Bender
Features: Insert the pipe spring into the pipe and bend across your knee Permanently bend Schedule 40 PVC pipe up to 90° without pipe collapsing Eliminates the need for heat guns or heating blankets Use fewer PVC fittings Note: Room temperature should be above 60°F.
Morris 52312, 3/4″ PVC Pipe Conduit Bender
Features: Insert the pipe spring into the pipe and bend across your knee Permanently bend Schedule 40 PVC pipe up to 90° without pipe collapsing Eliminates the need for heat guns or heating blankets Use fewer PVC fittings Note: Room temperature should be above 60°F.
Morris 52301, 20″ x 15″ PVC Conduit Heating Blanket, 2″ to 4″ Capacity
Features: Makes bends, offsets or saddles in PVC fast & easy Easy to use: wrap blanket around PVC, secure with hook & loop strap. Built-in stiffeners keep blanket tight on the PVC surface. Remove blanket and form bend by hand. Good for all schedules Controlled, even heating for uniform bending 6′ Cord & Plug Temperature
Morris 31820, 70″ Heavy Duty Cable Pulling Grip
Morris, 31820, 70″ Heavy Duty Cable Pulling Grip with Rotating Eye, 4.53″-4.90″ Cable Range Features: Double Weave Galvanized Steel Wire Mesh Aluminum Alloy Rotating Pulling Eye Appropriate for Heavy Duty Loads up to 37,500 Lbs (See Chart)
Morris 31821, 70″ Heavy Duty Cable Pulling Grip
Morris, 31821, 70″ Heavy Duty Cable Pulling Grip with Rotating Eye, 5.04″-5.98″ Cable Range Features: Double Weave Galvanized Steel Wire Mesh Aluminum Alloy Rotating Pulling Eye Appropriate for Heavy Duty Loads up to 37,500 Lbs (See Chart)
Morris 31823, 29″ Medium Duty Cable Pulling Grip
Morris, 31823, 29″ Medium Duty Cable Pulling Grip with Flexible Eye, 0.51″-0.59″ Cable Range Features: Double Weave Galvanized Steel Wire Mesh Aluminum Alloy Flexible Pulling Eye Appropriate for Medium Duty Loads up to 21,700 Lbs (See Chart) Used to Secure Cable to Pull Rope and Facilitate Pulling into Conduit.
Morris 31824, 32″ Medium Duty Cable Pulling Grip
Morris, 31824, 32″ Medium Duty Cable Pulling Grip with Flexible Eye, 0.63″-0.71″ Cable Range Features: Double Weave Galvanized Steel Wire Mesh Aluminum Alloy Flexible Pulling Eye Appropriate for Medium Duty Loads up to 21,700 Lbs (See Chart) Used to Secure Cable to Pull Rope and Facilitate Pulling into Conduit.
Morris 31825, 33″ Medium Duty Cable Pulling Grip
Morris, 31825, 33″ Medium Duty Cable Pulling Grip with Flexible Eye, 0.74″-0.98″ Cable Range Features: Double Weave Galvanized Steel Wire Mesh Aluminum Alloy Flexible Pulling Eye Appropriate for Medium Duty Loads up to 21,700 Lbs (See Chart) Used to Secure Cable to Pull Rope and Facilitate Pulling into Conduit.
Morris 31827, 35″ Medium Duty Cable Pulling Grip
Morris, 31827, 35″ Medium Duty Cable Pulling Grip with Flexible Eye, 1.50″-1.92″ Cable Range Features: Double Weave Galvanized Steel Wire Mesh Aluminum Alloy Flexible Pulling Eye Appropriate for Medium Duty Loads up to 21,700 Lbs (See Chart) Used to Secure Cable to Pull Rope and Facilitate Pulling into Conduit.
Morris 31829, 38″ Medium Duty Cable Pulling Grip
Morris, 31829, 38″ Medium Duty Cable Pulling Grip with Flexible Eye, 2.52″-2.95″ Cable Range Features: Double Weave Galvanized Steel Wire Mesh Aluminum Alloy Flexible Pulling Eye Appropriate for Medium Duty Loads up to 21,700 Lbs (See Chart) Used to Secure Cable to Pull Rope and Facilitate Pulling into Conduit.
Morris 31831, 44″ Medium Duty Cable Pulling Grip
Morris, 31831, 44″ Medium Duty Cable Pulling Grip with Flexible Eye, 3.50″-3.97″ Cable Range Features: Double Weave Galvanized Steel Wire Mesh Aluminum Alloy Flexible Pulling Eye Appropriate for Medium Duty Loads up to 21,700 Lbs (See Chart) Used to Secure Cable to Pull Rope and Facilitate Pulling into Conduit.
Morris 31836, 45″ Medium Duty Cable Pulling Grip
Morris, 31836, 45″ Medium Duty Cable Pulling Grip with Flexible Eye, 0.74″-0.98″ Cable Range Features: Double Weave Galvanized Steel Wire Mesh Aluminum Alloy Flexible Pulling Eye Appropriate for Medium Duty Loads up to 21,700 Lbs (See Chart) Used to Secure Cable to Pull Rope and Facilitate Pulling into Conduit.
Morris 31837, 45″ Medium Duty Cable Pulling Grip
Morris, 31837, 45″ Medium Duty Cable Pulling Grip with Flexible Eye, 1.02″-1.22″ Cable Range Features: Double Weave Galvanized Steel Wire Mesh Aluminum Alloy Flexible Pulling Eye Appropriate for Medium Duty Loads up to 21,700 Lbs (See Chart) Used to Secure Cable to Pull Rope and Facilitate Pulling into Conduit.
Morris 31838, 47″ Medium Duty Cable Pulling Grip
Morris, 31838, 47″ Medium Duty Cable Pulling Grip with Flexible Eye, 1.50″-1.92″ Cable Range Features: Double Weave Galvanized Steel Wire Mesh Aluminum Alloy Flexible Pulling Eye Appropriate for Medium Duty Loads up to 21,700 Lbs (See Chart) Used to Secure Cable to Pull Rope and Facilitate Pulling into Conduit.
Morris 31839, 48″ Medium Duty Cable Pulling Grip
Morris, 31839, 48″ Medium Duty Cable Pulling Grip with Flexible Eye, 1.96″-2.48″ Cable Range Features: Double Weave Galvanized Steel Wire Mesh Aluminum Alloy Flexible Pulling Eye Appropriate for Medium Duty Loads up to 21,700 Lbs (See Chart) Used to Secure Cable to Pull Rope and Facilitate Pulling into Conduit.
Morris 31840, 48″ Medium Duty Cable Pulling Grip
Morris, 31840, 48″ Medium Duty Cable Pulling Grip with Flexible Eye, 2.52″-2.95″ Cable Range Features: Double Weave Galvanized Steel Wire Mesh Aluminum Alloy Flexible Pulling Eye Appropriate for Medium Duty Loads up to 21,700 Lbs (See Chart) Used to Secure Cable to Pull Rope and Facilitate Pulling into Conduit.
Morris 31841, 50″ Medium Duty Cable Pulling Grip
Morris, 31841, 50″ Medium Duty Cable Pulling Grip with Flexible Eye, 3.00″-3.46″ Cable Range Features: Double Weave Galvanized Steel Wire Mesh Aluminum Alloy Flexible Pulling Eye Appropriate for Medium Duty Loads up to 21,700 Lbs (See Chart) Used to Secure Cable to Pull Rope and Facilitate Pulling into Conduit.
